Ürünler

Kaliteye Dokunun

FACP IQ8Control C

Ürün Bilgileri

  • Marka : Honeywell
  • Model : FACP IQ8Control C
  • Ürün Kodu : FACP IQ8Control C
  • Kategori : Honeywell Esser Yangın Uyarı Sistemleri

  • Max. two micromodules (system supports up to 254 digital loop addresses in total)
  • Max. two esserbus analog loop modules
  • Short circuit and open circuit resistant loop operation
  • Loop installation with I-Y(ST)Y 0.8 mm cable for a maximum length of 3.5 km
  • Up to 127 esserbus devices (fire detectors and/or manual call points)/detector zones per loop
  • Up to 32 esserbus transponders per loop/operation of wireless components (see chapter 10)
  • Operation types TM and PM as per DIN VDE 0833 - 2 to avoid unwanted alarms being triggered
  • Fire brigade operating panel and alarm transmission unit interface on the peripheral module
  • Three common relays, freely programmable, monitored, floating for up to 24 V DC/1A (on the peripheral module)
  • TTY or RS 485, RS 232 interface
  • Integration in the short circuit and open circuit resistant essernet network with up to 31 fire detection panels depends on transmission rate
  • Connection to graphical supervisor FlexES Guard/WINMAG via serial essernet interface (SEI)
  • Operating panel with alphanumerical display
  • Large display with 8 rows with 40 characters. As follows rated - four rows with 40 characters for the status information (first and last message), and the other four rows with 40 characters are used for system information e.g. “Sounders Off”
  • Event memory for up to 10,000 events
  • All System 8000 micromodules are compatible
  • Printer interface for internal printer
  • Two batteries with monitoring circuit
  • Monitored input for external power supply unit

  • Max. two micromodules (system supports up to 254 digital loop addresses in total)
  • Max. two esserbus analog loop modules
  • Short circuit and open circuit resistant loop operation
  • Loop installation with I-Y(ST)Y 0.8 mm cable for a maximum length of 3.5 km
  • Up to 127 esserbus devices (fire detectors and/or manual call points)/detector zones per loop
  • Up to 32 esserbus transponders per loop/operation of wireless components (see chapter 10)
  • Operation types TM and PM as per DIN VDE 0833 - 2 to avoid unwanted alarms being triggered
  • Fire brigade operating panel and alarm transmission unit interface on the peripheral module
  • Three common relays, freely programmable, monitored, floating for up to 24 V DC/1A (on the peripheral module)
  • TTY or RS 485, RS 232 interface
  • Integration in the short circuit and open circuit resistant essernet network with up to 31 fire detection panels depends on transmission rate
  • Connection to graphical supervisor FlexES Guard/WINMAG via serial essernet interface (SEI)
  • Operating panel with alphanumerical display
  • Large display with 8 rows with 40 characters. As follows rated - four rows with 40 characters for the status information (first and last message), and the other four rows with 40 characters are used for system information e.g. “Sounders Off”
  • Event memory for up to 10,000 events
  • All System 8000 micromodules are compatible
  • Printer interface for internal printer
  • Two batteries with monitoring circuit
  • Monitored input for external power supply unit